Muela diamantada galvánica en forma de cuenco de 100 mm de diámetro
-
It can be used in machining, semiconductor materials, glass plates, and daily necessities.
Sharp, high processing efficiency and can be applied to complex surface processing.
Cantidad mínima de pedido: 50 unidades
Peso neto: 450 g
Pago:30% anticipo
- Whatspp：+86 13357928197
- Correo electrónico：wang@jyxhzs.com
Detalle
Descripción
The bowl-shaped electroplated diamond grinding wheel with the thickness of the metal bond is 20% of the height of the diamond abrasive grain. Then the metal bond continues to bond the diamond abrasive grain with the metal bond to a thickness of about 2/3 of the height of the abrasive grain, including diamond dressing wheels, and electroplated diamond wheels for grinding or cutting.
The bowl-shaped electroplated diamond grinding wheel with the thickness of the metal bond is 20% of the height of the diamond abrasive grain. Then the metal bond continues to bond the diamond abrasive grain with the metal bond to a thickness of about 2/3 of the height of the abrasive grain, including diamond dressing wheels, and electroplated diamond wheels for grinding or cutting.
Especificaciones
| Lugar de origen | China |
| Marca | Jiangsu Xingzuan Tecnología de Materiales Superduros S.L. |
| Certificación | CNIPA |
| Abrasivo | Diamante |
| Bono | Unión galvánica |
| Tamaño de grano abrasivo | 80# 100# 150# 200# 320# 400# and 600# |
| Especificación | 100*35*20*10*5 |
| Peso neto | 560g |
| Número de modelo | 12A2 |
| Concentration | 200% |
| Peso neto | 450g |
| Cantidad mínima de pedido | 50 unidades |
| Plazo de entrega | 30 días a partir del pago por adelantado |
| Capacidad de suministro | Apoyo a la personalización |
| Pago | 30% avance |
Aplicaciones
High abrasive concentration, sharpness, and high processing efficiency. It is particularly suitable for grinding hard and brittle non-metallic materials such as glass, gemstones, crystals, and magnetic materials.
Ventaja competitiva
- The electroplating process is simple, the investment is low, and the manufacturing is convenient.
- Sharp, high processing efficiency can be applied to complex surface processing.
- No trimming is required, and it is easy to use.
- Very high working speeds can be achieved.
